|
| Interoperability Testing |
|
| Interpreting Session Errors |
|
|
|
Session Call | Reason | Corrective Action |
|
|
|
ses_uabort_id() | Used to decode incoming | Examine the output of the |
| abort indication. Indicates | remote application for |
| the application on top of the | further information as to why |
| Session layer detected some | the abort was sent. |
| problem. |
|
|
|
|
ses_connect_rf() | Called to decode a refusal to | Check the remote to see if it is |
| connection request. Indicates | available to service |
| that your connect request | connections. Also check your |
| arrived at the remote, but | proposed values. For more |
| remote did not like one of | information on disconnect |
| your proposed values or it is | codes and suggested actions, |
| not available to service | See “Interpreting Transport |
| connections. The refuse code | Errors” on page 33. |
| is displayed in the middle of |
|
| the osidiag output. |
|
|
|
|
Chapter 1 | 29 |
