HP UX Caliper Software manual Exclude-caliper, Exclude-idle, Fold, Frame-depth, Group-by

--exclude-caliper

--exclude-caliper TrueFalse

Specifies whether to include, in measurements, the activity due to the HP Caliper process.

Used only with the --scope system option.

The default value is True (HP Caliper process activity is excluded).

See “--scope” (p. 69).

--exclude-idle

--exclude-idle TrueFalse

Specifies whether to include, in measurements, the periods during which a given CPU is executing the idle loop. Inclusion takes effect for each CPU separately.

Used only with the --scope system option.

The default value is True (idle loop activity is excluded).

See “--scope” (p. 69).

--fold

The --[no]foldoption is deprecated. The closest equivalent to this option is the new --group-byoption.

--frame-depth

--frame-depth count

Specifies the maximum number of stack frames to unwind while collecting call stack samples.

This option is used only with the cstack measurement.

The default depth is 32.

--group-by

--group-by executable module none

Specifies how “matching” processes or modules should have their data combined in reports. (Matching processes or modules are processes or modules that have the same basename.)

This option can be used anytime you use the caliper command to produce a report (including the default stdout report). It can also be used when you use the following commands to create a report from one or more databases: caliper report, caliper merge, and caliper diff.

executable	Specifies that “matching” processes should have their data combined when
	possible.
	This is the default for all HP Caliper reports and for all caliper report,
	caliper merge, and caliper diff commands.
module	Specifies that “matching” modules should have their data combined. This produces
	a module-centric report. In a module-centric report, there is no data about
	individual processes in the collection runs. Instead, all matching modules with
	data that can be merged are grouped together, across processes.
	The following HP Caliper measurements cannot be combined across processes
	or modules:
	• cgprof(HP-UX only)
	• cpu(HP-UX only)

--exclude-caliper 61