If you have a special situation, there are two ways to select what performance data the HP Caliper Advisor analyzes:
•You can select one or more projects (implying all of their measurement runs).
•You can select one or more measurement runs from any project.
In either case, you select an entire project or a measurement run by clicking on its name in the Projects view. You can select more than one item (on Windows) by holding the Ctrl key while selecting the additional ones.
Figure 16 shows the Projects view, with a single project, Before Changes, selected. Every measurement run in the project is also selected.
Figure 16 Projects View, with a Single Project Selected
Figure 17 shows the Projects view, with a single measurement run, Data Cache Misses Run, selected. Every dataset in the run is also selected.
Selecting Performance Data to Analyze [Optional] 87