HP UX Caliper Software manual Db-save, Description-details, Details, Detail-cutoff

ADDR_MATCH ADDR_MASK PROC_FLAGS

is the 64-bit address to match.

is the 56-bit address mask to apply before matching the ADDR_MATCH bits.

is a comma-separated list of none , d, io, or iod.

none indicates no constraint. d indicates data address matching only. io indicates instruction address and opcode matching. iod indicates instruction address, opcode and data address matching.

--db-save

--db-save-details [syms][:code][:src][:all]

Allows you to save in the database containing your measurements, additional information for use in reporting. This option must be used when the measurement is first made. You can then generate reports or view reports in the GUI without needing access to the system where data was collected.

•syms — Saves symbol information about each load module.

•code — Saves the executable text segment (code) of each load module. This argument also implies the syms argument.

•src — Saves source line attribution data for each load module. This argument also implies the code and syms arguments.

•all — Same as the src argument.

--description-details

--description-details all[target][:times][:sampling][:images][:none]

Specifies the level of detail reported for per-process or per-application summary.

The default value is --description-details target:times:sampling.

Previously available options [:processor][:run][:help] have been deprecated and have no effect on report.

--details

Used only with the caliper info command. See “How to Display Reference Information About CPU Counters or HP Caliper Report Types” (p. 101).

--detail-cutoff

--detail-cutoffpercent_cutoff[,cum_percent_cutoff[,min_count]]

Specifies cutoff values that limit the functions reported in the Function Details section of a PMU histogram report. This option is used in conjunction with the --sort-bymetric option, which you can use to specify which metric you want to be used for sorting and cutoffs.

HP Caliper stops reporting information when it reaches either a percent cutoff or a cumulative percent cutoff:

•You can limit the report only to functions that exceed a specified percentage of the total for the sorting/cutoff metric. Once HP Caliper encounters this percent cutoff, it stops reporting functions.

•You can limit the report by having HP Caliper stop reporting functions once the cumulative percent of the functions so far listed exceeds the cumulative percent cutoff value.

You can also specify an integer for the minimum number of functions to be displayed for all load modules.

For details, see “Metrics You Can Use for Report Sorting and Cutoffs” (p. 105).

58 HP Caliper Options