percent_cutoff | The percentage of the total for the sorting/cutoff metric that a given |
| function must exceed to appear on the report. This is shown as percent |
| cutoff on reports. |
| Default value is 1.0. |
| This value only takes effect if the Percent of Total column is selected |
| for the report. |
cum_percent_cutoff | The value of the cumulative percentage at which HP Caliper stops |
| reporting results. This is shown as cumulative percent cutoff on reports. |
| Default value is 100. |
| This value only takes effect if the Cumulative percent column is |
| selected for the report. |
min_count | Sets the minimum number of functions to be displayed for all load |
| modules. This is shown as minimum function entries on reports. |
| Default value is zero. |
Example
If you specify:
$ caliper fprof
The contents of the Function Details section is a list of functions containing:
•The functions that account for 80 percent of the total IP samples in the wordplay program.
•Only those functions that each account for more than one percent of total samples for all load modules. Because percent_cutoff was not specified, HP Caliper used the default value, 1 percent.
See
Controls the number of cycles of programmable delay for the Integrity servers
Use this option to change the way in which the ETB collects the samples. When you specify a nonzero value with this option, the ETB will continue to collect instruction pointer (IP) samples for the specified number of cycles from the point of the rest of the PMU freeze.
See also
Example
To produce a flat profile based on execution stalls due to GR/GR or GR/load:
$ caliper cycles
Choosing correct values for the