HP UX Caliper Software manual Help, Hotpaths, Ibrp, Info, Inlines

	•	pmu_trace
	•	scgprof
	Collections with the above measurements will always be processed as if
	--group-by none were specified.
	See “Module-Centric Reports” (page 107).
none	Specifies that data from matching processes or modules should not have their
	data combined. This is used only for the caliper and caliper report
	commands.

See “Creating Reports from Multiple Databases” (page 114).

--help

See “-H or --help” (p. 49).

--hotpaths

--hotpaths

Specifies whether or not the hot call paths section should appear in callgraph measurement reports. The default value is True. This option is used only with the cgprof, and scgprof reports.

--ibrp

--ibrp=IBRP_INDEX,PLM,ADDR_MATCH,ADDR_MASK

Specifies the bits to program the PMU's instruction address range matching registers. Forces event monitoring to be constrained by instruction addresses ranges.

IBRP_INDEX	can be 0, 1, 2 or 3. It identifies one of the four Instruction Breakpoint Register
	pairs (IBRPs) used to specify the desired address range.
PLM	specifies the privilege level setting. The privilege levels available are: "user",
	"kernel", and "all".
ADDR_MATCH	is the 64-bit address to match.
ADDR_MASK	is the 56-bit address mask to apply before matching the ADDR_MATCH bits. The
	HP Caliper option --_debug-pmu-settingswill dump the exact bits
	programmed into the PMUs registers. This is helpful in verifying the bits
	programmed into the opcode matching and address matching registers.
	For more information about opcode matching, instruction address range and
	data address range matching, refer to the following Intel documentation: Dual-Core
	Update to the Intel Itanium 2 Processor Reference Manual for Software
	Development and Optimization, Document Number 308065-001. http://
	download.intel.com/design/Itanium2/manuals/30806501.pdf and Intel Itanium
	2 Processor Reference Manual for Software Development and Optimization,
	Document Number 251110-003.http://www.intel.com/design/itanium2/
	manuals/251110.htm

--info

--info

Causes HP Caliper to append help information to the end of textual reports.

--inlines

--[no]inlines

62 HP Caliper Options