INTRODUCTION

Dear Customer,

Congratulations on your choice to buy a Husqvarna product! Husqvarna is based on a tradition that dates back to 1689, when the Swedish King Karl XI ordered the construction of a factory on the banks of the Husqvarna River, for production of muskets. The location was logical, since water power was harnessed from the Huskvarna River to create the water-powered plant. During the more than 300 years of beeing, the Husqvarna factory has produced a lot of different products, from wood stoves to modern kitchen appliances, sewing machines, bicycles, motorcycles etc. In 1956, the first motor driven lawn mowers appeared, followed by chain saws in 1959, and it is within this area Husqvarna is working today.

Today Husqvarna is one of the leading manufacturers in the world of forest and garden products, with quality as our highest priority. The business concept is to develop, manufacture and market motor driven products for forestry and gardening as well as for building and construction industry. Husqvarnas aim is also to be in the front edge according to ergonomics, usability, security and environmental protection. That is the reason why we have developed many different features to provide our products within these areas.

We are convinced that you will appreciate with great satisfaction the quality and performance of our product for a very long time to come. The purchase of one of our products gives you access to professional help with repairs and service whenever this may be necessary. If the retailer who sells your machine is not one of our authorised dealers, ask for the address of your nearest service workshop.

It is our wish that you will be satisfied with your product and that it will be your companion for a long time. Think of this operators manual as a valuable document. By following itscontent (using, service, maintenance etc) the life span and the second-hand value of the machine can be extended. If you will sell this machine, make sure that the buyer will get the operators manual.

Thank you for using a Husqvarna product.

Husqvarna AB has a policy of continuous product development and therefore reserves the right to modify the design and appearance of products without prior notice.

1154580-38 Rev.1 2011-12-05

What is what on the chain saw? (1)

1Cylinder cover

2Air purge

3Start reminder

4Right-hand brake trigger (140e TrioBrake)

5Combined start and stop switch

6Information and warning decal

7Fuel tank

8Adjuster screws carburettor

9Starter handle

10Starter

11Chain oil tank

12Product and serial number plate

13Felling direction mark

14Front handle

15Front hand guard

16Muffler

17Saw chain

18Bar tip sprocket

19Guide bar

20Spike bumper

21Chain catcher

22Chain tensioning screw

23Clutch cover (135, 140)

24Rear handle with right hand guard

25Throttle trigger

26Throttle lockout

27Clutch cover (135e, 140e, 140e TrioBrake)

28Chain tensioner wheel

29Knob

30Operators manual

31Guide bar cover

32Combination spanner

English 9

Page 9
Image 9
Husqvarna 140E TRIOBRAKE, 135E manuel dutilisation Introduction, Dear Customer, What is what on the chain saw?