Baud Rate
Youcan set baud rate to any of the following values:
v300
v600
v1200
v2400
v4800
v9600 (default)
v19200
v38400
Tochange or check the Baud Rate:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
4. Press ↓until the message SERIAL INTERFACE displays.
5. Press →until the message INTF=xxxxxxxxx displays, where xxxxxxxxx can be
SERIAL NO,RS-232C,orRS-422A.
6. Press ↓until the message BAUD=xxxxx displays, where xxxxx can be 300,600,
1200,2400,4800,9600,19200,or38400. If you want to select a value other than
the one displayed, press ←or →.
7. Toexit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
Data Bits
Youcan set data bit to either of the following values:
v8 (default)
v7
Tochange or check the Data Bits:
1. Ensure the printer is powered off (O).
2. Press and hold Menu/Enter while powering on (|) the printer. The message
STARTING UP displays.
3. After start-up is complete, release Menu/Enter and the message PRINT OUT=NO
displays.
4. Press ↓until the message SERIAL INTERFACE displays.
5. Press →until the message INTF=xxxxxxxxx displays, where xxxxxxxxx can be
SERIAL NO,RS-232C,orRS-422A.
6. Press ↓until the message DATA BITS=x displays, where x can be 8or 7.Ifyou
want to select a value other than the one displayed, press ←or →.
7. Toexit from Power On Configuration, press Menu/Enter. Your new value is
stored in NVM.
92 4247 Printer ModelA00 User’s Guide