IBM A00 Description of Each Forms Path, Front Push Forms Path, Rear Push Forms Path, Dual Push Forms Paths

vFor forms stacking convenience, consider ordering the optional printer stand. See
“Optional Printer Stand” on page32, or contact your IBM marketing
representative to order.
vConsider the following when using the optional Automatic Sheet Feeder:
– Youcannot use Rear Pull or Push Pull with the optional Automatic Sheet
Feeder installed.
– Toimprove access, remove the ASF when loading the Rear Push forms path.
Description of Each Forms Path
Use the following information and the information in “Choosing a Forms Path for
YourNeeds” on page 34 and “Choosing a Forms Path for Special Forms” on
page 35 to help you select an alternate forms path for your forms and needs.
Front Push Forms Path
The Front Push forms path is the default
forms path that you set up in “Default Forms
Path”on page13.
Rear Push Forms Path
Dual Push Forms Paths
The Dual Push forms paths is a combination
of the Front Push and the Rear Push forms
paths. This provides
two paths into which the
forms can be loaded. Youcan alternate
printing between the two paths.
36 4247 Printer ModelA00 User’s Guide