4. Close the forms guide and the top cover.
5. Reinstall the black protective cap on the electrical connector if you are not
installing this forms tractor into the printer. Store the forms tractor.
Preparing Printer for Selected Forms Path
Youmust perform the following procedures for the forms path you have chosen:
1. “Setting Forms Guide Deflector”
2. “Setting Push-Pull Selector” on page46
3. “Removing or Installing Paper Bail” on page47
4. “Setting Forms Tractors” on page 50
Setting Forms Guide Deflector
See Table7 for the correct setting for your selected forms path.
Table7. Setting the Forms Guide Deflector
Front Push
with Manual Rear Push
with Manual Dual Push
with Manual Rear Pull Push Pull
Forms Guide
Deflector Open Open Open Closed Closed
Set the forms guide deflector as follows:
1. Press Online to take the printer offline.
2. Open the top cover and the forms guide (see Figure 21on page 45).
44 4247 Printer ModelA00 User’s Guide