IBM A00 Changing to a Different Forms Path

Changing to a Different Forms Path
Tochange the forms path, you will perform the following tasks:
1. Identify the existing forms path (see “Identifying Existing Forms Path” on
page 42).
2. Identify the new forms path (see “Identifying New Forms Path” on page42).
3. Remove the existing forms tractor, if necessary (see “Removing Existing Forms
Tractor”on page 42).
4. Prepare the new forms path (see “Preparing Printer for Selected Forms Path” on
page 44).
Figure 18. Tractorsand Forms Paths
Chapter3. Setting Up Another Forms Path 41