v2 to 136 (at 10 CPI and Prop)
v2 to 163 (at 12 CPI)
v2 to 204 (at 15 CPI)
v2 to 233 (at 17.1 CPI)
v2 to 272 (at 20 CPI)
Tochange or check the Right Margin:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press until the message FORM SETTING displays.
3. Press until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
LPI,8 LPI,12 LPI,3L/30MM,4L/30MM,6L/30MM,8L/30MM,or12L/30MM.
4. Press until the message RIGHT MARGIN=xxx displays, where xxx can be a value
from 2to 272 depending on your character-per-inch setting. If you want to select
a value other than the one displayed, press or .
5. Toexit from Program Configuration, press until the message STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press or to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Slashed Zero
Youcan set this value to:
No (default) All printed zeros will appear without a slash through them.
Yes All printed zeros will appear with a slash through them.
Tochange or check the Slashed Zero:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press until the message FORM SETTING displays.
3. Press until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
LPI,8 LPI,12 LPI,3L/30MM,4L/30MM,6L/30MM,8L/30MM,or12L/30MM.
4. Press until the message SLASH ZERO=xxx displays, where xxx can be NO or
YES. If you want to select a value other than the one displayed, press or .
5. Toexit from Program Configuration, press until the message STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press or to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Restore Manufacturing Defaults
Youcan set this value to:
No (default) Save the new values of the selected forms path.
Yes Return to the manufacturing default values of the selected forms
path.
Tochange or check the Manufacturing Default values:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press until the message FORM SETTING displays.
118 4247 Printer Model A00 User’s Guide