For the Dual Push forms paths or the Push Pull forms path, you will need to have
ordered and installed the optional, second forms tractor.Also consider ordering the
optional printer stand (see “Optional Printer Stand” on page32). Contact your IBM
marketing representative for details or to order either item.
Choosing a Forms Path for Your Needs
Note: IBM recommends that whenever possible you use the Front Push forms path
for all your printing needs.
Youmight select a forms path based on other operating needs. Use the following
table when you are selecting a path. See “Chapter 8. Supplies, Forms, and Cables”
on page 151 for information about forms weights and thicknesses.
Table3. Considerations For Choosing a Path
Function Front
Push Rear
Push Rear
Pull Push
Pull Manual Sheet
Feed Comments
Autoload X X
Document on Demand
(DOD) / TearOff XX
TearOff Adjustment X X
Dual Path Forms Input X X Requires 2 tractors. IBM
recommends optional Printer
Stand.
Park X X Requires manual tear off
Quiet Key XXXX XReduces throughput by 50%
AFTA XXXX X
Topof Form X X
VerticalAdjustment X X
HorizontalAdjustment XXXX
ASF Mountable X * * See note 1.
Notes:
1. IBM recommends you remove theASF before loading forms into the Rear Push forms path.
2. Touse the Push Pull or Dual Push forms paths you must install the optional, second forms tractor.
Figure 17. 4247 Printer Forms Paths
34 4247 Printer ModelA00 User’s Guide