3. Grasp the forms guide deflector with one hand and the plastic rib on the forms
guide with the other hand.
4. While pulling the forms guide deflector and the plastic rib apart, move first the
right side then the left side of the forms guide deflector to be either above or
below the metal pins. The correct position is noted in Table7 on page 44.
Figure 22 shows the forms guide deflector being moved from the closed (pull)
position to the open (push) position.
5. Close the forms guide and the top cover.
Setting Push-Pull Selector
See Table8 for the correct setting you will make for your selected forms path.
Table8. Setting the Push-Pull Selector
Rear Push
with Manual Dual Push
with Manual Rear Pull Push Pull
Push-Pull
Selector Push Push Push Pull Pull
Figure 22. Forms Guide Deflector
46 4247 Printer ModelA00 User’s Guide