If you want to save the new value, press ←or →to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Left Margin
Note: Youcan find similar information in “Horizontal” on page 112 and “Right
Margin”.
This parameter selects the left margin defined as a number of blank print positions
starting from the position set in Horizontal Adjustment (“Horizontal” on page 112)in
relation to the current pitch (characters-per-inch setting). Available values are:
v0 (default)
v0 to 66 (at 5 CPI)
v0 to 79 (at 6 CPI)
v0 to 100 (at 7.5 CPI)
v0 to 114 (at 8.5 CPI)
v0 to 134 (at 10 CPI and Prop)
v0 to 161 (at 12 CPI)
v0 to 202 (at 15 CPI)
v0 to 231 (at 17.1 CPI)
v0 to 270 (at 20 CPI)
Tochange or check the Left Margin:
1. Press Menu/Enter. The message PRINT OUT=NO displays.
2. Press ↓until the message FORM SETTING displays.
3. Press →until the message LINE SP=xxxxxxx displays, where xxxxxxx can be 6
LPI,8 LPI,12 LPI,3L/30MM,4L/30MM,6L/30MM,8L/30MM,or12L/30MM.
4. Press ↓until the message LEFT MARGIN=xxx displays, where xxx can be a value
from 0to 270 depending on your character-per-inch setting. If you want to select
a value other than the one displayed, press ←or →.
5. Toexit from Program Configuration, press ↓until the message STORE=QUIT
displays. If you want to exit without saving the new value, press Menu/Enter.
If you want to save the new value, press ←or →to select either STORE=SAVE (new
value is stored in NVM) or STORE=CURRENT (new value remains valid until the
printer is powered off (O)). Press Menu/Enter to save the new value.
Right Margin
Note: Youcan find similar information in “Horizontal” on page 112 and “Left
Margin”.
This parameter selects the right margin, which is defined as a number of blank print
positions (+2) starting from the left margin, and extending to the maximum number
of characters-per-line, at the current pitch. Available values are:
v136 (default)
v2 to 68 (at 5 CPI)
v2 to 81 (at 6 CPI)
v2 to 102 (at 7.5 CPI)
v2 to 116 (at 8.5 CPI)
Chapter4. Configuring Your Printer 117