2. For additional information on stacking, see “Setting Up Manual Sheet Feed
Path” on page30 or “Chapter 3. Setting Up Another Forms Path” on page 39,
depending on your forms path.
Environmental Requirements
The printer operates best in business offices.
Attention: Toprevent printer damage, do not power on (|) the printer immediately
after the printer has been moved from an environment that does not meet the
following operating requirements. Introduce the printer to the new operating
environment at least 24 hours before you power it on (|).
Operating Environment
The following tables show the operating environment requirements for the printer.
Variable Range or Value
Temperature 10° to 40° C (50° to 104°F) 16° to 32° C (60° to 90°F) with
ASF
Relative humidity 8% to 80%
Maximum wet bulb
temperature 26.7°C (80.0°F) 22.8°C (73.0°F) withASF
Note: The best conditions for feeding and stacking are within a temperature range
of 15.6° to 32.2°C (60° to 90°F) and a relative humidity range of 26% to
62%.
Nonoperating Environment
The following tables show the non-operating environment requirements for the
printer.
Variable Range or Value
Temperature 10° to 51°C (50° to 125°F) 10° to 43°C (50° to 109°F) with
ASF
Relative humidity 8% to 80%
Maximum wet bulb
temperature 26.7°C (80°F) 27.0°C (80.6°F) withASF
Shipping Environment
The following table shows the shipping environment requirements for the printer.
Variable Range or Value
Temperature -40° to 60°C (-40° to 140°F)
Relative humidity 5% to 100% (including condensation, excluding rain)
Maximum wet bulb
temperature 30°C (86°F)
Note: The printer must be covered in plastic.
160 4247 Printer ModelA00 User’s Guide