Youcan configure the printer for any one of five forms paths; the Front Push, the
Rear Push, the Dual Push, the Rear Pull, or the Push Pull forms paths.
One forms tractor is supplied with the printer; this allows you to setup the Front
Push, the Rear Push, or the Rear Pull forms path. If you are setting up either the
Dual Push or the Push Pull forms path, install a second (optional) forms tractor.
Contact your IBM marketing representative to order this option.
vWhat type of interface cable was ordered?
See “Ordering Signal Cable” on page153.
vWas an optionalAutomatic Sheet Feeder (ASF) ordered?
For information about setting up or using the ASF,refer to the

4247 Printer

Automatic Sheet Feeder Guide

.
vWas an optional printer stand ordered?
If you ordered a printer stand, you will find it in a separate shipping container.
See “Optional Printer Stand” on page32 for more information about the optional
printer stand. Contact your IBM marketing representative to order this option.
CAUTION:
<1> The printer (without optional features attached) weighs approximately
24.9 kilograms (55 pounds). Before attempting to lift the printer, get help from
another person.
Unpacking Your Printer
Check the list below as you unpack the shipping container. Contact your local IBM
Branch Office if any of the following items or items listed on the printer order are
missing.
hPrinter
hOne forms tractor (and optional second unit, if ordered)
hRibbon cartridge
h

4247 Printer Model A00 User’s Guide,

SA24-4400
h

4247 Printer Model A00 Quick Reference Guide,

SA24-4405
hPrinter driver diskette
hInterface cable (if ordered)
hPower cord
hOperator panel overlay
hWire forms guide (For Push forms paths)
h

4247 Printer Safety Notices,

SA24-4406 (outside USA)
24247 Printer ModelA00 User’s Guide