Youwill be prompted to enter values for the following parameters. The
parameter range will be shown in parentheses ( ). The parameter default
will be shown in square brackets [ ].
Table17. Configuration Parameter List - Port Configuration
Parameter Information
Parameter
Link type
ValidValues
Ethernet (E)
Tokenring (T)
ATM(A)
DLSw (D)
PPP (P)
Frame relay (F)
SDLC (S)
X.25 (X)
IP
Default Value
None
Description
This parameter specifies the type of link associated with this port.
Parameter
Interface number
ValidValues
0 to 65533
Default Value
0
Description
This parameter defines the physical interface number of the hardware interface to
which this device is attached.
APPN Configuration Commands
Chapter2. Configuring and Monitoring APPN 125