IBM SC30-3865-04 manual 130

Table18. Configuration Parameter List - Port Configuration for ATM (continued)
Parameter Information
Parameter
ATMNetwork Type
ValidValues
Campus or Widearea
Default Value
Campus
Description
This parameter specifies the network type used for default values for connection
networks and other link stations defined on this port.
Parameter
Shareable connection network traffic
ValidValues
Yes,No
Default Value
No
Description
This parameter specifies whether connection network traffic can be routed on theATM
VC set up for a link station on this port.
Parameter
Shareable other protocol traffic
ValidValues
Yes,No
Default Value
No
Description
This parameter specifies whether other higher level protocol traffic can be routed on the
ATMVC set up for a link station on this port.
Parameter
Broadband Bearer Class
ValidValues
Class_A, Class_C, Class_X
Default Value
Class_X
Description
This parameter specifies the bearer class requested from theATM network. The
classes are defined:
Class A
Constant bit rate (CBR) with end-to-end timing requirements
Class C
Variablebit rate (VBR) with no end-to-end timing requirements
Class X
Service allowing user-defined traffic type and timing requirements
APPN Configuration Commands
130 MRS V3.2 Protocol Config Ref Vol2