Table19. Configuration Parameter List - Port Definition (continued)
Parameter Information
Parameter
Maximum number of link stations
ValidValues
1 to 127 for SDLC ports
1 to 239 for X.25 ports
1 to 976 for all other ports
(cannot be configured for PPP ports)
Default Value
1 for PPP ports (cannot be changed)
If SDLC is configured as multipoint and primary,then this parameter defaults to 127.
Otherwise, it is set to 1 and is not configurable.
239 for X.25 ports
512 for all other ports
Description
This parameter specifies the maximum number of link stations that will be allowed to
use this port. This parameter allows the resources for theAPPN node and this port to
be constrained.
Parameter
Percent of link stations reserved for incoming calls (Ethernet, token-ring, FR, X.25 only)
ValidValues
0to100
The sum of the percent of link stations reserved for incoming calls and the percent of
link stations reserved for outgoing calls cannot exceed 100%.
Default Value
0
Description
This parameter specifies the percentage of the maximum number of link stations that
will be reserved for incoming calls. Link stations that are not reserved for incoming or
outgoing calls are available for either purpose on a demand basis.
APPN Configuration Commands
136 MRS V3.2 Protocol Config Ref Vol2