Table36. Configuration Parameter List - APPN Local PU (continued)
Parameter Information
Parameter
Primary DLUS name
ValidValues
Astring of 1 to 8 characters:
vFirst character:A to Z
vSecond to eighth characters:A to Z, 0 to 9
Default Value
None
Description
This parameter specifies the name to be used to override the primary DLUS configured
for this node.
Parameter
Secondary DLUS name
ValidValues
Astring of 1 to 8 characters:
vFirst character:A to Z
vSecond to eighth characters:A to Z, 0 to 9
Default Value
None
Description
This parameter specifies the name to be used to override the secondary DLUS
configured for this node.
Parameter
Autoactivate
ValidValues
YesorNo
Default Value
Yes
Description
This parameter specifies whether to activate this link at start-up.
Syntax:
add routing_list
Note: These questions are asked only if you have configured the node as
a border node.
Routing lists are not supported for 2210 12x models.
There are a number of editing shortcut keys available to speed the
modification of existing data in a previously configured routing list. These
shortcut keys may be used when you are prompted for the Destination
LUs and the Routing CPs.
vEnter alone will retain the currently displayed name.
vSpace bar followed by Enter will delete the currently displayed name.
APPN Configuration Commands
Chapter2. Configuring and Monitoring APPN 187