Ping6
Use the ping6 command to ping an IPv6 address.
Syntax:
ping6
Example:
IPV6>ping
Destination IPv6 address [::]? 8::9
Source IPv6 Address [1::8]?
Ping data size in bytes [56]?
Ping TTL [64]?
Ping rate in seconds [1]?
PING6 1::8 -> 8::9: 56 data bytes, ttl=64, every 1 sec.
----8::9 PING6 Statistics----
36 packets transmitted, 36 packets received
Destination IPv6 address
Valid Values:Any valid IPv6 address
Default Value: None
Source IPv6 address
Valid Values:Any valid IPv6 address
Default Value: None
Ping data size in bytes
Valid Values:0 to size of global buffer
Default Value:56
Ping ttlSpecifies the time-to-live for the ping.
Valid Values:1-255
Default Value:64
Ping rate in seconds
Specifies the ping frequency.
Valid Values:1-60
Default Value:1
Traceroute6
Use the traceroute6 command to dynamically trace a route.
Syntax:
traceroute6 ...
Example:
IPV6>traceroute6
Destination IPv6 address []? 7::8
Source IPV6 address []? 6::9
Data size in bytes [56]?
Number of probes per hop [3]?
IPV6 Monitoring Commands (Talk5)
402 MRS V3.2 Protocol Config Ref Vol2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|