2. The DLCI number specified on the ports can be the same or different.
3. The BDA MAC address is not defined on the connection network
definition.
4. The BNI MAC address/SAP pair specified on the ports can be the same
or different.
Port Level Parameter Lists
Use the following tables to configure APPN ports:
v“Port Configuration” on page 125
v“Port Definition” on page 135
v“Port Default TG Characteristics” on page140
v“Port default LLC Characteristics” on page146
Link Level Parameter Lists
Use the following tables to configure APPN link stations:
v“HPR Defaults” on page 148
v“Link Station - Detail” on page150
v“Modify TG Characteristics” on page 165
v“Modify Dependent LU Server” on page168
v“Modify LLC Characteristics” on page169
v“Modify HPR Defaults” on page171
LU Parameter List
Use the following table to configure an LU:
v“LEN End Node LU Name” on page173
Node Level Parameter Lists
Use the following tables to configure an APPN node:
v“Local node basic characteristics” on page83
v“High Performance Routing (HPR)” on page89
v“HPR Timer and Retry Options”on page 90
v“Dependent LU Requester” on page93
v“Connection Network - Detail” on page174
v“TG Characteristics (Connection Network)” on page180
v“APPN COS - Additional port to CN”on page 185
v“Node Level Traces” on page 102
v“Interprocess Signals Traces” on page 108
v“Module Entry and Exit Traces”on page 112
v“General Component Level Traces”on page 114
APPN
48 MRS V3.2 Protocol Config Ref Vol2