Table31. Configuration Parameter List - Connection Network Configuration for
ATM (continued)
Parameter Information
Parameter
LDLC Timer Period
ValidValues
1 to 255 seconds
Default Value
ForATM: 1 second
For IP: 15 seconds
Description
This parameter specifies the timer period used with the LDLC retry count.
Parameter
Broadband Bearer Class
ValidValues
Class_A, Class_C, or Class_X
Default Value
Class_X
Description
This parameter specifies the bearer class requested from theATM network. The
classes are defined:
Class A
Constant bit rate (CBR) with end-to-end timing requirements
Class C
Variablebit rate (VBR) with no end-to-end timing requirements
Class X
Service allowing user-defined traffic type and timing requirements
Parameter
Shareable Regular Network traffic
ValidValues
YesorNo
Default Value
Yes,if this is a Best Effort CN. No, otherwise.
Description
This parameter specifies whether traffic on this connection network TG can be routed
on anATM VC set up for a regular TG or another CN TG.
APPN Configuration Commands
178 MRS V3.2 Protocol Config Ref Vol2