Table37. Configuration Parameter List - Routing List Configuration (continued)Parameter Information
Parameter
Enable routing list optimization
ValidValues
YesorNo
Default Value
Yes
Description
Indicates whether the node is allowed to reorder the subnetwork routing list so that
entries most likely to succeed come first. This reordering occurs in the internal
temporary copy of the routing list.
Parameter
Destination LU found via this list
ValidValues
Afully-qualified LU name with optional trailing wildcard. Legal characters for the LU
name are:A-Z, @, $, #, 0-9.
The first character of the NETID part and of the LU name part must be non-numeric.
Any of the FQ LU names may be terminated with a wild card “*” character to designate
the range of LUs. For example,
v*
vNETI*
vNETI.LUA*
Default Value
Blank
Description
This parameter specifies a list of destination LUs that can be found via this routing list.
This question will be repeated until terminated with a null entry.
Notes:
1. Only a single entry among all of the routing lists may have a standalone “*” . This
will match all LUs, and the routing list containing it is known as the default routing
list.
2. All the editing shortcuts described at the beginning of this table are available to
speed modification of a previously configured routing CP(s) list.
3. Any given LU name may not be duplicated in another routing list.
4. Maximum number of LU names that may be specified:
v2210 12x - not supported
v2210 14x or 24x - 98
APPN Configuration Commands
Chapter2. Configuring and Monitoring APPN 189