Notes:
1. The BDA address is not defined on the connection network definition.
Example 5
Notes:
1. The same DLCI number must be specified on both ports.
2. The same BNI MAC address/SAP pair must be specified on both ports.
3. No BDA MAC address is specified on the connection network definition.
4. If the APPN node initiates the connection to the device, theAPPN port
chosen for the connection depends upon which port responds first to
the test frame.
Example 6
Notes:
1. This configuration requires two connection network definitions since
there are two SATFs.
Figure 9. Single Connection Network using Bridging with One Frame Relay Port
Figure 10. Single Connection Network Using Bridging with Multiple Frame Relay Ports
Figure 11.Multiple Connection Networks Using Bridging
APPN
Chapter1. APPN 47