Table23. Configuration Parameter List - Link Station - Detail (continued)
Parameter Information
Parameter
Adjacent node subnet affiliation
ValidValues
0 (native)
1 (non-native)
2 (negotiable)
Default Value
Default is taken from the equivalent port level parameter
Description
This parameter specifies whether the adjacent node is in this node’s nativeAPPN
subnetwork or in a non-nativeAPPN subnetwork. A value of
2
instructs the node to
negotiate at link activation time to determine whether the adjacent link station is native
or non-native.
Note: This question is asked only if the border node function is enabled on this node.
Table24. Configuration Parameter List - Station Configuration for ATM
Parameter Information
Parameter
Virtual Channel Type
ValidValues
SVC, PVC
Default Value
SVC
Description
This parameter identifies theATM channel type as switched virtual circuit (SVC) or
permanent virtual circuit (PVC).
Note: The following parameters are common for SVCs and PVCs.
Parameter
DestinationATM Address
ValidValues
A40- hexadecimal character string
Default Value
None
Description
This parameter specifies the 20–byte string that comprises the entire destinationATM
address.
APPN Configuration Commands
Chapter2. Configuring and Monitoring APPN 159