Modify RIP6 flags on which interface?
Specifies the interface number on which RIP6 is to be
disabled.
Note: The interface must have RIP6 configured.
Valid Values:Any valid interface number
Default Value: 0
sending ...
Modify RIP6 flags on which interface?
Specifies the interface number on which RIP6 is to be disabled.
Note: The interface must have RIP6 configured.
Valid Values:Any valid interface number
Default Value: 0
all-routes
Disables advertisement of all RIP6 routes on an interface.
Valid Values:YesorNo
Default Value: Yes
default-routes
Disables advertisement of RIP6 default routes on an interface.
Valid Values:YesorNo
Default Value: Yes
static-routes
Disables advertisement of RIP6 static routes on an interface.
Valid Values:YesorNo
Default Value: Yes
poisoned-reverse-routes
Disables poison reverse in sending RIP6 updates on an interface.
Valid Values:YesorNo
Default Value: Yes
Enable
Use the enable command to enable RIP6.
Syntax:
enable rip6
override ...
sending ...
rip6 Enables RIP6 on the specified interface.
Valid Values:YesorNo
Default Value: Yes
RIP6 Configuration Commands (Talk6)
428 MRS V3.2 Protocol Config Ref Vol2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
||
||
||
|
|