IPV6 Monitoring Commands
This section describes the IPV6 monitoring commands.
Table68. IPv6 Monitoring Command Summary
Command Function
? (Help) Displays all the commands available for this command level or lists the
options for specific commands (if available). See “Getting Help” on page
xxvi.
cache Displays cache entries.
counters Displaycounters
dump routing
tables Dumps the configured routing tables.
interface
addresses Displays the addresses defined on the interface.
mcast Displays a list of registered multicast addresses.
mld Displays MLD counters or parameters.
route
sizes Displays buffer sizes.
static routes Displays static routes.
packet-filter Displays configured packet filters.
path-mtu
ping6 Activates Ping.
traceroute6 Dynamically traces a route.
tunnels Displays configured tunnels.
Exit Returnsyou to the previous command level. See “Exiting a Lower Level
Environment” on page xxvii.
Cache
Use the cache command to display
Syntax:
cache
Example:
IPV6>cache
Destination Usage Next hop
Counters
Use the counters command to display the status of counters.
Syntax:
counters
Example:
IPV6>counters
Routing errors
Count Type
0 Routing table overflow
0 Net unreachable
0 Bad subnet number
0 Bad net number
IPV6 Monitoring Commands (Talk5)
398 MRS V3.2 Protocol Config Ref Vol2
|
|
|
|
|
||
|||
|
||
||
|
|
|
|
|
|
||
||
||
||
||
||
||
||
||
||
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|