Table38. Configuration Parameter List - COS Mapping Table Configuration (continued)

Parameter Information
Parameter
Native and non-native COS-name pair
ValidValues
Apair of COS names, separated by a blank. Legal characters are: A-Z, @, $, #, 0-9
The first character of each name must be non-numeric.
Default Value
Blank
Description
This parameter identifies a pair of COS names.A native COS name is followed by the
corresponding non-native COS name.
For any given COS mapping table, one of the COS name pairs may specify the
non-native COS name as “*” . This designates the default entry to use for all non-native
COS names that do not explicitly match another entry in the table.
One COS name pair cannot exactly match another COS name pair in a given table.
However,a given native COS name can be used in multiple entries, and it is also okay
for a given non-native COS name to be used in multiple entries. The operational
software will use the first entry it finds.
This question will be repeated until terminated with a null entry.
Notes:
1. The native and non-native names cannot be identical. Only COS names that need
to be changed should be specified.
2. A given native or non-native COS name may appear in multiple entries, but you
cannot have two identical COS name pairs.
3. When you have multiple native COS names mapping to the same non-native COS
name, the border node will use the first of those mappings when it needs to map
from non-native to native. Similarly,when you have multiple non-native COS names
mapping to a common native COS name, the border node will use the first of those
mappings when it needs to map from native to non-native.
4. Any given COS mapping table can have the following maximum number of COS
name pairs:
v2210 12x - not supported
v2210 14x or 24x - 46
5. Across all COS mapping tables, you may use no more than the following number of
native COS names:
v2210 12x - not supported
v2210 14x or 24x - 96
There is no analogous limit for non-native COS names.
6. Any given native COS name may appear no more than 255 times across all routing
lists.
Delete

Use the delete command to delete:

Syntax:
APPN Configuration Commands
192 MRS V3.2 Protocol Config Ref Vol2