Table31. Configuration Parameter List - Connection Network Configuration for
ATM (continued)
Parameter Information
Parameter
QoS
ValidValues
CLASS_0, CLASS_1, CLASS_2, CLASS_3, CLASS_4, where
CLASS_0
The unspecified class. The network does not specify any QoS.
CLASS_1
Performance is comparable to current digital private line performance.
CLASS_2
Intended for packetized video and audio in teleconferencing and multimedia
applications.
CLASS_3
Intended for interoperation of connection-oriented protocols, such as Frame Relay.
CLASS_4
Intended for interoperation of connectionless protocols, such as IP.
Default Value
CLASS_3
Description
This parameter indicates which class of service is provided to anATM virtual
connection.
Table32. Configuration Parameter List - TG Characteristics (Connection Network)
Parameter Information
Parameter
Cost per connect time
ValidValues
0to255
Default Value
0
Description
This parameter expresses the relative cost of maintaining a connection over the
associated TG. The units are user-defined and are typically based on the applicable
tariffs of the transmission facility being used. The assigned values should reflect the
actual expense of maintaining a connection over the TG relative to all other TGs in the
network.A value of zero means that connections over the TG may be made at no
additional cost (as in the case of many non-switched facilities). Higher values represent
higher costs.
APPN Configuration Commands
180 MRS V3.2 Protocol Config Ref Vol2