Icom IC-R3 Memory bank selection Memory clear, Push Func + V/M for 2 sec. to clear

5 MEMORY CHANNELS

■ Memory bank selection ■ Memory clear

The receiver has 400 memory channels in 8 banks (A–H) for storage of often-used frequencies.

qSelect memory mode with [V/M].

wRotate [DIAL] while pushing [FUNC] to select the desired memory banks.

eRotate [DIAL] to select the desired memory channel.

FMFMFM

Memory bank A Memory bank G Memory bank H

Unwanted memory channels can be cleared (erased). Before clearing a memory channel, make sure it is no longer needed as cleared memories cannot be recalled.

qSelect memory mode with [V/M].

wSet the memory channel to be cleared with [DIAL].

•Rotate [DIAL] while pushing [FUNC] to select a memory bank (A–H) or programmed scan edge channel.

eSelect VFO mode with [V/M] and push [V/M] for 1 sec. to indicate the selected memory channel.

•Do not hold [V/M] for more than 2 sec., otherwise the selected memory channel will be overwritten.

rPush [FUNC] + [V/M] for 2 sec. to clear.

•3 beeps sound, then the frequency is cleared. t Push [MODE] to return to VFO mode.

[EXAMPLE]: Clearing memory channel 3 (memory bank A).

	FM	M:A03	FM			FM	M:A03			M:A03
			146.010.000
	146.340.000					146.340.000				. .
	TS	15.0	TS	15.0		TS	15.0	FUNC	TS	.
	S1 3 5 7 9		S1 3 5 7 9			S1 3 5 7 9		+	S1 3 5 7 9
					V/M SKIP			V/M SKIP
V/M SKIP	VOL		V/M SKIP VOL			VOL			VOL	MODE SET
	FM		FM		for 1 sec.	FM		for 2 sec.
Select memory
channel

16