◊VFO scan watch
qSelect the desired memory channel to be watched. w Push [V/M] to select VFO mode.
e Push [↔] for 2 sec. to start full scan, band scan or pro- grammed scan. (p. 19)
r Push [FUNC] + [(MODE) SET] momentarily to enter set mode.
•Select a
tRotate [DIAL] to select “Priority” or “PRIo.”
•“PRIo” disappears after 1 sec. and “oFF” and “PR” appears when color LCD is OFF.
yPush [↔] or rotate the tuning dial while pushing [FUNC] to select priority watch ON or priority watch ON with alert (BELL).
•If the pocket beep function is activated, the receiver automati- cally selects the tone squelch function when the priority watch is selected.
Pause Scan | : | 10SEC |
| Pause Scan | : | 10SEC |
| Pause Scan | : 10SEC | |
Priority | : | OFF |
| Priority | : | ON |
| Priority | : | BELL |
Beep Audio | : | VOLUME |
| Beep Audio | : | VOLUME |
| Beep Audio | : VOLUME | |
Light | : | AUTO |
| Light | : | AUTO |
| Light | : | AUTO |
A.Power OFF : | OFF |
| A.Power OFF : | OFF |
| A.Power OFF : | OFF |
Priority watch set | Priority watch is ON. Priority watch with |
mode | alert is ON. |
PRIORITY WATCH 7
uPush [(MODE) SET] to exit set mode and start the watch.
•The receiver checks the memory channel frequency every 5 sec.
•The watch resumes according to the selected scan resume con- dition. (p. 22)
•If the priority watch with alert is ON, you can be alerted with beeps and a flashing “P.B” or “ë.”
•If the direction finding screen is selected, the receiver automati- cally selects the simple screen when the priority watch starts.
FM
|
|
| M:A18 |
| |
145.765.000 |
| ||||
TS |
| 15.0 | FM | PRIO | |
ALL |
|
|
|
|
|
PRIO | 3 | 5 | 7 | 9 |
|
S1 |
| ||||
RX |
|
|
| RX |
|
VOL |
|
|
|
|
|
While pausing on the memory channel, “PRIO” flashes.
iPush [V/M] while the display shows the VFO frequency to stop the watch.
27