7 PRIORITY WATCH
■Priority watch operation
◊Memory channel watch and memory scan
watch
qSelect VFO mode; then, set an operating frequency. w Set the watching channel(s).
For memory channel watch: Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [↔] for 2 sec. to start memory scan.
e Push [FUNC] + [(MODE) SET] momentarily to enter set mode.
•Select a
Pause Scan | : | 10SEC |
| Pause Scan | : 10SEC |
| Pause Scan | : 10SEC | ||
Priority | : | OFF |
| Priority | : | ON |
| Priority | : | BELL |
Beep Audio | : | VOLUME |
| Beep Audio | : VOLUME |
| Beep Audio | : VOLUME | ||
Light | : | AUTO |
| Light | : | AUTO |
| Light | : | AUTO |
A.Power OFF : | OFF |
| A.Power OFF : | OFF |
| A.Power OFF : | OFF | |||
Priority watch set | Priority watch is ON. Priority watch with |
mode | alert is ON. |
rRotate [DIAL] to select “Priority” or “PRIo.”
•“PRIo” disappears after 1 sec. and “oFF” and “PR” appears when color LCD is OFF.
tPush [↔] or rotate the tuning dial while pushing [FUNC] to select priority watch ON or priority watch ON with alert (BELL).
•If the pocket beep function is activated, the receiver automati- cally selects the tone squelch function when the priority watch is selected.
yPush [(MODE) SET] to exit set mode and start the watch.
•The receiver checks the memory channel frequency every 5 sec.
•The watch resumes according to the selected scan resume con- dition. (p. 22)
•If the priority watch with alert is ON, you can be alerted with beeps and a flashing “P.B” or “ë.”
•If the direction finding screen is selected, the receiver automati- cally selects the simple screen when the priority watch starts.
FM
|
| M:A18 |
|
|
145.765.000 |
|
| ||
TS | 15.0 | FM | PRIO | |
PRIO |
| 7 9 |
|
|
S1 3 5 |
|
| ||
RX |
|
| RX |
|
VOL |
|
|
|
|
While pausing on the memory channel, “PRIO” flashes.
uPush [V/M] while the display shows the VFO frequency to stop the watch.
26
