8 SUBAUDIBLE TONE OPERATION
■Tone squelch operation
◊Operation
The tone squelch opens only when receiving a signal con- taining a matching subaudible tone. You can silently wait for calls from group members using the same tone in an ama- teur band.
qSet the operating frequency in FM mode. w Set the desired subaudible tone in set mode.
•See the following section for programming.
ePush [FUNC] + [(MODE) SET] momentarily to enter set mode.
• Select a
rRotate [DIAL] until “Tone Squelch” or “tSqL” appears.
•“tSqL” disappears after 1 sec. and “to” appears when color LCD is OFF.
Tone Squelch: | OFF |
| Tone Squelch: | OFF |
| Tone Squelch: | TSQL | ||||||
Tone | Freq. | : | 88.5 |
| Tone | Freq. | : | 88.5 |
| Tone | Freq. | : | 88.5 |
Duplex | : | OFF |
| Duplex | : | OFF |
| Duplex | : | OFF | |||
Offset Freq.: | 0.600 |
| Offset Freq.: | 0.600 |
| Offset Freq.: | 0.600 | ||||||
Scan | Resume : | 2SEC |
| Scan | Resume : | 2SEC |
| Scan | Resume : | 2SEC |
Tone function set | Tone squelch OFF | Tone squelch ON |
mode |
|
|
tPush [↔] or rotate the tuning dial while pushing [FUNC] to
select “TSQL” (tone squelch).
yPush [(MODE) SET] to exit set mode and start the tone squelch.
uWhen the received signal includes a matching tone, the squelch opens and the signal can be heard.
•When the received signal’s tone does not match, tone squelch does not open, however, the
•To open the squelch manually, push and hold [SQL]. (default)
iTo cancel the tone squelch, repeat steps
◊Setting subaudible tones for tone squelch
operation
qSelect VFO mode or desired memory channel to be pro- grammed.
28