|
| 10 |
| BAND SCOPE | |
The band scope function allows you to visually check a spec- | y Rotate [DIAL] to set the highlighted cursor to the desired | |
ified frequency range. Sweep range can be selected from ±5 | waveform and set the frequency of the signal. | |
kHz through ±500 kHz. | • Start sweeping to set the selected frequency to the center fre- | |
| quency. | |
Receive audio is muted while monitoring the band scope. |
|
|
Push [SQL] to cancel sweeping and receive the audio. |
|
|
qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON. w Push [FUNC] + [↕] one or more times to select the band
scope screen.
e Set the desired frequency as band scope center frequency. r Push [FUNC] + [V/M] momentarily to select the sweep
range, if desired.
•5, 10, 20, 100 and 500 kHz sweep ranges are available.
FM | TS= 25.0 |
| ||||||||||
146.100.000 | Sweep range | |||||||||||
S1 3 5 7 9 | ||||||||||||
| VOL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
tPush [FUNC] + [V/M] momentarily to start a sweep once or push them for 2 sec. to start sweeping continuously.
•Signal conditions (strengths) appear starting from the center of the range.
•Push [SQL] to cancel sweeping.
33