Icom IC-R3 Display backlighting, Setting the backlighting condition, Basic Operation

TV screens cannot be selected by pushing [MODE]. See p. 34 for TV operation details.

WFM	WFM
RX	RX
TV screen	FM TV mode
frequency selection	(ATV type only)

■Display backlighting

The receiver has display backlighting with a 5 sec. timer for nighttime operation. The display backlighting can be turned ON continuously or turned OFF, if desired.

➥Push any switch except [FUNC]; or, rotate [DIAL] to turn the backlighting ON.

•When auto backlighting is set, the backlighting will automatically turn OFF when switches and [DIAL] have not been operated for 5 sec.

BASIC OPERATION 4

◊Setting the backlighting condition

qPush [FUNC] + [(MODE) SET] momentarily to enter set mode.

• Select a non-band scope screen in advance for color LCD.

wRotate [DIAL] until “LIGHT” appears.

•“LIGHt” disappears after 1 sec. and the previously selected back- lighting timer and “LI” appears when color LCD is OFF.

ePush [↔] or rotate the tuning dial while pushing [FUNC] to select the desired backlighting condition.

rPush [(MODE) SET] to exit set mode.

Pause Scan	: 10SEC		Pause Scan	: 10SEC		Pause Scan	: 10SEC
Priority	:	OFF	Priority	:	OFF	Priority	:	OFF
Beep Audio	: VOLUME		Beep Audio	: VOLUME		Beep Audio	: VOLUME
Light	:	AUTO	Light	:	AUTO	Light	:	OFF
A.Power OFF	:	OFF	A.Power OFF	:	OFF	A.Power OFF	:	OFF

Backlighting set	Automatic backlighting Continuously OFF
mode

13