Display brightness, Display background color | Icom IC-R3 specs

13 OTHER FUNCTIONS

■Display brightness

This item adjusts the brightness of the color LCD from 0 % to 100 % in 32 steps.

qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON. w Push [FUNC] + [(MODE) SET] momentarily to enter set

mode.

•Select a non-band scope screen in advance.

eRotate [DIAL] until “Bright” appears.

• “bRIGHt” disappears after 1 sec. and “bR” appears.

rPush [↔] or rotate the tuning dial while pushing [FUNC] to adjust the brightness of the color LCD.

tPush [(MODE) SET] to exit set mode.

Key Lock	: NORMAL			Key Lock	: NORMAL			Key Lock	: NORMAL
Display	:	AUTO		Display	:	AUTO		Display	:	AUTO
Contrast	:	50%		Contrast	:	50%		Contrast	:	50%
Bright	:	50%		Bright	:	50%		Bright	:	25%
Back Color	:	4		Back Color	:	4		Back Color	:	4
RX				RX				RX
Display brightness				50% (default)			25%
set mode

■Display background color

This item selects the background color of the color LCD from 8 colors.

qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON. w Push [FUNC] + [(MODE) SET] momentarily to enter set

mode.

•Select a non-band scope screen in advance.

eRotate [DIAL] until “Back Color” appears.

rPush [↔] or rotate the tuning dial while pushing [FUNC] to

select the background color.

• 0	black	4	blue
1	pink	5	purple
2	green	6	lime
3	orange	7	white

tPush [(MODE) SET] to exit set mode.

Key Lock	: NORMAL			Key Lock	: NORMAL
Display	:	AUTO		Display	:	AUTO
Contrast	:	50%		Contrast	:	50%
Bright	:	50%		Bright	:	50%
Back Color	:	4		Back Color	:	1
4 (default)				1 (black)

44

Image 48

Icom IC-R3 instruction manual Display brightness, Display background color, Rotate Dial until Bright appears

Contents

IR3 You experience a ringing in your ears, reduce the volume Areas with temperatures below -10C +14F or aboveEven when the receiver power is OFF, a slight current still +60C +140F Supplied Accessories Accessories included with the receiver Qty Table of Contents Accessory Attachment Battery installationAntenna Belt clip Panel Description Panel description VFO/MEMORY Switch V/M Skip Mode Switch Mode SETMonitor Switch SQL ATT External DC Power Jack DC Function display Skip Scan Indicator pgs Battery Indicators2ATTENUATOR Indicator p Audio and video output jack information Dual LCD Frequency and Channel Setting What is VFO?VFO and memory channels Operating band selection Setting a frequency Setting a tuning step Push SQL ATT to exit the attenuator setting condition Selecting a memory channelAttenuator function Lock function When a signal is received Basic OperationReceiving U.S.A. version automatically turns itself OFF when Setting volume level Setting squelch levelWhile pushing SQL, rotate Dial to select the squelch level Receive mode selection Monitor function Setting the backlighting condition Push Func + Mode SET momentarily to enter set modeDisplay backlighting Rotate Dial until Light appears Memory channel contents Memory ChannelsGeneral Programming during selection Transferring memory contents to another memory Programming after selection Memory bank selection Memory clear Push Func + V/M for 2 sec. to clearExample Clearing memory channel 3 memory bank a Rotate the tuning dial to select the desired character Memory names Scan Operation Scan typesFull Scan p Function p Full/band/programmed scan Release ↔ to start the scan Memory bank scan To stop the scan, push ↔ again Selecting scan edges Band ranges Skip channel setting Setting the scan pause timeScan resume condition Rotate Dial until Pause Scan or Pause appears Setting the scan resume time Rotate Dial until Scan Resume or RESUmE appears Frequency skip function Programming a skip frequencyFrequency skip function ON/OFF Priority Watch Priority watch typesMemory Scan Watch p VFO Scan Watch p Push Mode SET to exit set mode and start the watch Priority watch operationMemory channel watch and memory scan Watch Rotate Dial to select Priority or PRIo VFO scan watch Setting subaudible tones for tone squelch Operation Subaudible Tone OperationTone squelch operation Operation Pocket beep operation Rotate Dial until Tone Freq. or tonE appearsAvailable subaudible tone frequencies Unit Hz Tone scan Push SQL to stop the beeps and ﬂashingPush ↔ to stop the scan Duplex Operation Duplex shift directionRotate Dial until Duplex or dUP appears Offset frequency Rotate Dial until Offset Freq. or oFFSEt appears Band Scope Range, if desired Skip channel setting TV OperationTV operation TV channel receiving TV frequency AM TV receiving TV frequency AM TV memory channelPush ↔ one or more times to select the band above 30 MHz Push Func + one or more times to select the TV screen Sub carrier adjustment ATV operationATV memory channel Signal source Signal levelsDirection Finding Direction ﬁnding function example Set mode Set mode itemsOther Functions Setting dial select step Dial select stepRelease Func to exit the condition Auto power-off function Rotate Dial until A.Power OFF or AP oFF appearsBeep tones Rotate Dial until Beep Audio or bEEP appears Power saver Monitor switch actionRotate Dial until Power Save or P Save appears Rotate Dial until Monitor or monI appears Dial speed acceleration Lock function effectRotate Dial until Dial Speedup or SPEEd appears Rotate Dial until Key Lock or LoCk appears Display mode selection Color LCD can be automatically turned on when usingDisplay contrast Rotate Dial until Display or dISP appears Display brightness Display background colorRotate Dial until Bright appears Partial reset Total resetPush Power for 2 sec. to turn power OFF Cloning function Battery Charging Battery cautionsBattery charging Battery pack installation CP-18A/E fuse ReplacementCP-18A/E Turn power OFF CheckRegular charging Rapid charging with the BC-135 Operation Flow Chart Memory mode VFO mode Confirmation beep p Backlighting p Power save p Auto power OFF pScan resume time p TV Frequency Table A. channelsCcir channels Australian channels Taiwan channelsNew Zealand channels China channels Indonesian channels Italian channels FOT channels Specifications and Options GeneralReceiver Operating periods Approx Options Troubleshooting Problem Possible Cause Solution Quick Reference Quick Reference Declaration of Conformity Kamihigashi, Hirano-ku, Osaka 547-0002 Japan