8 SUBAUDIBLE TONE OPERATION
tRotate [DIAL] until “Tone Squelch” or “tSqL” appears.
•“tSqL” disappears after 1 sec. and “to” appears when color LCD is OFF.
yPush [↔] or rotate the tuning dial while pushing [FUNC] to select “P BEEP” (pocket beep).
uPush [(MODE) SET] to exit set mode and start the pocket beep.
• “P.B” or “T SQL ë” appears in the function display.
iWhen a signal with the correct tone is received, the re- ceiver emits beep tones for 30 sec. and flashes “P.B” or “ë.”
FM | P.B |
146.100.000 | |
TS | 15.0 |
S1 | 3 | 5 | 7 9 | flashes when correct | |||||||
tone is received. | |||||||||||
RX |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||||
VOL |
|
|
|
|
|
|
|
| |||
| FM |
|
|
| TSQL |
| |||||
RX |
|
| P |
|
| ||||||
oPush [SQL] to stop the beeps and flashing.
• Tone squelch is automatically selected.
■Tone scan
The receiver can detect the subaudible tone frequency in a received signal. By monitoring a signal that is being transmit- ted on a frequency, you can check the tone frequency re- quired to access the repeater, or to open the tone squelch.
qSet the desired frequency or memory channel to be checked for a tone frequency.
wSelect FM mode with [MODE].
ePush [FUNC] + [↔] for 2 sec. to start the tone scan.
• To change the scanning direction, rotate [DIAL].
rWhen the tone frequency is detected, the set mode con- tents are programmed with the tone frequency.
•The tone scan pauses when a tone frequency is detected.
•The detected tone frequency is used for the tone squelch fre- quency.
•“Ct” appears during tone scan.
tPush [↔] to stop the scan.
30
