2 PANEL DESCRIPTION

Panel description

q

!1

 

 

!0

 

Color LCD

w

(p. 6)

 

 

o

w FUNCTION SWITCH [FUNC]

While pushing this switch, other switches and tuning dial perform secondary functions.

“Push [FUNC] + a switch” means “while pushing the [FUNC] switch, push the switch” as indicated by the mark e.g. [] etc.

e MULTI FUNCTION SWITCH [MULTI]

Push [] to adjust the audio level. (p. 11)

Push [FUNC] + [] to toggle between AM TV (frequency

selection), amateur TV (ATV-type) and WFM/FM/AM

modes when the color LCD is OFF. (p. 34)

Push [FUNC] + [] for 2 sec. to toggle the color LCD ON

and OFF (p. 6, 30 MHz and above only).

Push [FUNC] + [] to select color LCD function when the

e

r

i

Sub LCD (p. 4)

color LCD is ON. (p. 6)

Push [] to select the operating band (VHF, UHF, etc.)

in VFO mode. (p. 7)

• Broadcast, HF, 50 MHz, FM broadcast, VHF avionics, 144

MHz, 300 MHz, 400 MHz, 800 MHz, 1200 MHz, 2400 MHz

t

u

y

SPEAKER

q ANTENNA CONNECTOR (p. 1)

Connects the supplied antenna.

2

and TV bands (channel selection) can be selected.

Push [FUNC] + [] to select the dial select step. (p. 39)

Push [] for 2 sec. to start a scan. (pgs. 19, 20)

Push [FUNC] + [] for 2 sec. to start a tone scan. (p.

30)

Push [] means push ó up or down; and push [] means push ó left or right.

r POWER SWITCH [POWER]

Push for 2 sec. to toggle the receiver power ON and OFF.

Page 6
Image 6
Icom IC-R3 instruction manual Panel Description, Panel description