Icom IC-R3 Cloning function, Partial reset, Total reset, Push Power for 2 sec. to turn power OFF

OPC-474

■Cloning function

The IC-R3 has receiver-to-receiver data cloning capability. This function is useful when you want to copy all of the pro- grammed contents from one IC-R3 to another. An optional OPC-474 CLONING CABLE is required.

The optional CS-R3 CLONING SOFTWARE and the optional OPC-478 CLONING CABLE are available to clone and edit contents with a PC (for Microsoft® Windows® 95 and 98).

qWhile pushing [MODE] and ó [UP], push [POWER] for 2 sec. to enter cloning mode.

• “CLonE” appears.

wConnect an optional OPC-474 between both [SP] jacks. e Push [SQL] on the “mas-

ter” receiver (receiver-to- receiver cloning only).

•“oUt” appears and the signal

indicator shows that cloning is taking place.

r Push [POWER] for 2 sec. to turn power OFF.

Microsoft® and Windows® are regis- tered trademarks of Microsoft Corpo- ration in the U.S.A. and other countries.

OTHER FUNCTIONS 13

■Partial reset

If you want to initialize the operating conditions (VFO fre- quency, VFO settings, set mode contents) without clearing the memory contents, a partial resetting function is available for the receiver.

➥While pushing [FUNC] and [V/M], turn power ON to partially reset the receiver.

■Total reset

Reset the CPU before operating the receiver for the first time, or when the internal CPU malfunctions.

➥While pushing [FUNC], [V/M] and [MODE], turn power ON to reset the CPU.

•“CLEAR” appears in the sub LCD when resetting the CPU.

CAUTION: Resetting the CPU returns all programmed contents to their default settings.

45