57
OPERATING GUIDE
iR3
■BASIC OPERATION
qPush [POWER] for 2 sec.
wPush [↕] to set the desired audio level.
eSelect VFO mode with [V/M].
r Select the desired band with [↔]. t Rotate [DIAL] to change the fre-
quency.
•The frequency changes according to the preset tuning steps.
ySet the squelch level.
•While pushing [SQL], rotate [DIAL].
•The first click of [DIAL] indicates the current squelch level.
•“LEVEL1” is loose squelch and “LEVEL9” is tight squelch.
q Cut
w Folde Complete
<CUT HERE>
•“AUTO” indicates automatic level ad- justment.
tWhen a signal is received:
•Squelch opens and audio is emitted from the speaker.
•The S/RF indicator shows the relative signal strength.
◊Using the dial select step (p. 39) Rotate [DIAL] while pushing [FUNC] to change the frequency in 100 kHz, 1 MHz or 10 MHz steps.
■DUPLEX OPERATION
qSet the receive station frequency
(e.g. repeater output frequency).
wSet the shift direction of the trans- mit station frequency in set mode.
e Push and hold [SQL] to monitor the transmit station’s frequency.
By cutting along the line and folding on the dotted line, it will become a card sized operating guide which can easily be carried in a card case or wallet, etc. | Important operating instructions are summed up in this and the following page for your simple reference. | QUICK REFERENCE 19 |
|
| |
| |||||
|
|
|
| ||
◊Tone scan (p. 30)
Push [FUNC] + [↔] for 2 sec. to start the tone scan.
■MEMORY CHANNEL SELECTION
qPush [V/M] to select memory
mode.
•“M:” or “X” appears.
wSelect a memory channel with [DIAL].
eRotate [DIAL] while pushing [FUNC] to select the memory bank.
■MEMORY CLEAR
qSelect the desired memory chan- nel.
wSelect VFO mode with [V/M] and push [V/M] for 1 sec. to indicate the channel.
ePush [FUNC] + [V/M] for 2 sec.
