Dual LCD | Icom IC-R3 manual

2 PANEL DESCRIPTION

■Dual LCD

The receiver has dual LCDs for versatile display selection.

The color LCD has 5 screens and 1 optional screen as fol- lows:

simple, multi-function, band scope, direction ﬁnding, TV (fre- quency selection) and amateur TV* screen.

* Amateur TV screen can be selected for the ATV-type and 1200/2400 MHz bands only.

The color LCD can be used when the operating frequency is 30 MHz and above.

qPush [FUNC] + [↕] for 2 sec. to turn the color LCD ON, if desired.

wPush [FUNC] + [↕] momentarily one or more times to tog- gle the screen of the color LCD.

While the color LCD is in use, the sub LCD displays the voltage of the power source.

RX

Appears when simple screen is selected.

FM

PSKIP

FM

PSKIP

146.100.000

TS

146.100.000

TS

15.0

15.0

RX

S1

3

5

7 9

Simple screen

VOL

Multi-function

screen

FUNC

FM

PSKIP

+

146.100.000

TS

15.0

momentarily

ATV screen (p. 36;

Direction finding

ATV type, 1200/2400 MHz bands only)

screen (p. 37)

FM

PSKIP

146.100.000

TS= 15.0

S1 3

5

7 9

SWEEP- 10K

RX

VOL

TV screen (p. 34;	Band scope
frequency selection)	screen (p. 33)

6

Image 10

Icom IC-R3 instruction manual Dual LCD

Contents

IR3 Even when the receiver power is OFF, a slight current still You experience a ringing in your ears, reduce the volumeAreas with temperatures below -10C +14F or above +60C +140F Supplied Accessories Accessories included with the receiver Qty Table of Contents Antenna Accessory AttachmentBattery installation Belt clip Panel Description Panel description Monitor Switch SQL ATT VFO/MEMORY Switch V/M SkipMode Switch Mode SET External DC Power Jack DC Function display 2ATTENUATOR Indicator p Skip Scan Indicator pgsBattery Indicators Audio and video output jack information Dual LCD VFO and memory channels Frequency and Channel SettingWhat is VFO? Operating band selection Setting a frequency Setting a tuning step Attenuator function Push SQL ATT to exit the attenuator setting conditionSelecting a memory channel Lock function Receiving When a signal is receivedBasic Operation U.S.A. version automatically turns itself OFF when While pushing SQL, rotate Setting volume levelSetting squelch level Dial to select the squelch level Receive mode selection Monitor function Display backlighting Setting the backlighting conditionPush Func + Mode SET momentarily to enter set mode Rotate Dial until Light appears General Memory channel contentsMemory Channels Programming during selection Transferring memory contents to another memory Programming after selection Push Func + V/M for 2 sec. to clear Memory bank selection Memory clearExample Clearing memory channel 3 memory bank a Rotate the tuning dial to select the desired character Memory names Full Scan p Scan OperationScan types Function p Full/band/programmed scan Release ↔ to start the scan Memory bank scan To stop the scan, push ↔ again Selecting scan edges Band ranges Scan resume condition Skip channel settingSetting the scan pause time Rotate Dial until Pause Scan or Pause appears Setting the scan resume time Rotate Dial until Scan Resume or RESUmE appears Programming a skip frequency Frequency skip functionFrequency skip function ON/OFF Memory Scan Watch p Priority WatchPriority watch types VFO Scan Watch p Memory channel watch and memory scan Watch Push Mode SET to exit set mode and start the watchPriority watch operation Rotate Dial to select Priority or PRIo VFO scan watch Tone squelch operation Setting subaudible tones for tone squelch OperationSubaudible Tone Operation Operation Rotate Dial until Tone Freq. or tonE appears Pocket beep operationAvailable subaudible tone frequencies Unit Hz Push SQL to stop the beeps and ﬂashing Tone scanPush ↔ to stop the scan Duplex shift direction Duplex OperationRotate Dial until Duplex or dUP appears Offset frequency Rotate Dial until Offset Freq. or oFFSEt appears Band Scope Range, if desired TV operation Skip channel settingTV Operation TV channel receiving Push ↔ one or more times to select the band above 30 MHz TV frequency AM TV receivingTV frequency AM TV memory channel Push Func + one or more times to select the TV screen ATV operation Sub carrier adjustmentATV memory channel Direction Finding Signal sourceSignal levels Direction ﬁnding function example Set mode items Set modeOther Functions Dial select step Setting dial select stepRelease Func to exit the condition Beep tones Auto power-off functionRotate Dial until A.Power OFF or AP oFF appears Rotate Dial until Beep Audio or bEEP appears Rotate Dial until Power Save or P Save appears Power saverMonitor switch action Rotate Dial until Monitor or monI appears Rotate Dial until Dial Speedup or SPEEd appears Dial speed accelerationLock function effect Rotate Dial until Key Lock or LoCk appears Display contrast Display mode selectionColor LCD can be automatically turned on when using Rotate Dial until Display or dISP appears Display background color Display brightnessRotate Dial until Bright appears Push Power for 2 sec. to turn power OFF Partial resetTotal reset Cloning function Battery charging Battery ChargingBattery cautions Battery pack installation Regular charging CP-18A/E fuse ReplacementCP-18A/ETurn power OFF Check Rapid charging with the BC-135 Operation Flow Chart Memory mode VFO mode Auto power OFF p Confirmation beep p Backlighting p Power save pScan resume time p A. channels TV Frequency TableCcir channels Taiwan channels Australian channelsNew Zealand channels China channels Indonesian channels Italian channels FOT channels General Specifications and OptionsReceiver Operating periods Approx Options Troubleshooting Problem Possible Cause Solution Quick Reference Quick Reference Declaration of Conformity Kamihigashi, Hirano-ku, Osaka 547-0002 Japan