PROCEDURE 3 | HARDWARE TORQUE SPECIFICATIONS |
|
|
T
O R Q
REAR WHEEL DRIVE BASE FRAME HARDWARE
TORQUE SPECIFICATIONS
U E
S P E C I F I C A T I O N S
Loctite and torque to 
160 in/lbs
REAR OF
WHEELCHAIR
Loctite and
Torque to 75 in/lbs
Torque to 160 in/lbs
Tighten until snug
| Loctite and | |
| torque to |
|
| 75 in/lbs |
|
|
| 8 - inch Wheels - |
| Wheel Halves - | Torque to 120 in/lbs |
| 9 - inch Wheels - | |
Torque to | Torque to Torque to 75 in/lbs | Torque to 160 in/lbs |
160 in/lbs | 160 in/lbs |
|
CONVENTIONAL MOTOR/GEARBOX
Torque to 160 in/lbs
Torque to
1020 in/lbs
FRONT OF
WHEELCHAIR
Pneumatic with Flat-Free Wheel Halves - Torque to
160in/lbs
Pneumatic Wheel Halves - 8 - inch - Torque to 18 in/lbs
9 - inch - Torque to 160 in/lbs
GEARLESS/BRUSHLESSMOTOR
NOTE: All torque specifications called out for the con- ventional motor/gearbox assembly are applicable to the gearless/brushless motor except for the following:
Torque to 13 ft/lbs.
Torque to 75 in/lbs.
Torque to 13 ft/lbs. 
Torque to 25 in/lbs. | Torque to 13 ft/lbs. |
16
