PROCEDURE 15 | MWD WHEELCHAIRS |
|
|
M
W D
W H E E L C H A
Installing
1.Install battery box tray onto base frame.
2.Secure the front of the battery box tray to battery mount brackets with existing locknuts. Torque to
3.Secure the rear of the battery box tray to the base frame with existing mounting screws and locknuts. Torque to
4.Reinstallthebatterybox.RefertoINSTALLING/REMOV- ING GROUP 22 BATTERY BOX in PROCEDURE 9 of this manual.
3.Disconnect the right and left motor connectors from the controller connectors.
4.Remove the two (2) mounting screws that secure the charger cable to the mount bracket.
5.Remove the charger cable from the mount bracket.
5.Cut the
6.Remove the wiring harness.
7.Remove the four (4) mounting screws that secure the battery mount brackets to the base frame and remove the battery mount brackets.
I
R S
Front Locknuts | Battery Mount |
FRONT OF | Bracket |
| |
CHAIR | Mounting |
| |
| Screws |
|
| REAR OF |
Battery | Base | CHAIR |
| ||
Box Tray | Frame | Rear Locknuts |
FIGURE 2 - REMOVING/INSTALLING GROUP 22
BATTERY BOX TRAY
EQUIPMENT OPTION
CONVERTING GROUP 22 BATTERY BOX TRAY TO GROUP 24 BATTERY BOX SUB FRAME
NOTE: The battery box tray and battery mount brackets will notbeusedwiththisoption.Keepforfutureuse.
Removing Group 22 Components (FIGURE 3)
1.Remove the battery box. Refer to INSTALLING/RE- MOVING GROUP 22 BATTERY BOX in PROCE- DURE 9 of this manual.
2.Removetheexistingbatteryboxtray.RefertoREMOV-
ING/INSTALLING THE GROUP 22 BATTERY BOX TRAY in this procedure of the manual.
Tie Wrap
Charger Cable/
Bracket
Motor
Connector
Motor Connector
Spacer
Locknut
Mounting
Screws
Base Frame
Shock
Battery Mount Bracket
FIGURE 3 - REMOVING GROUP 22 COMPONENTS
Installing Group 24 Components (FIGURE 4)
1.Align the mounting holes of the NEW wiring harness w/bracket, the NEW battery box
2.Install the two (2) mounting screws through all three (3) parts and secure with locknuts. Torque to
70
