Invacare Arrow, Torque SP, Ranger X service manual Steps 2, Steps 6,11, Steps 6,17, Steps 4,8

BACK FRAME	PROCEDURE 8
17. If necessary, reposition the spreader bar at the cor-	18. Reinstall the armrest onto the wheelchair. Refer to
rect height for the corresponding back height and	INSTALLING/REMOVING FLIPBACKARMRESTS
torque the mounting hardware to 60-inch pounds.	in PROCEDURE 4 of the owner’s manual, 1081227.

		B
		A
	Spacers	C
	(STEPS 3, 13)	K
	Locknuts	F
	(STEPS 3, 13)	R
Back Cane		A
		M
(STEPS 3, 10)
		E
Mounting
Screw
(STEPS 2, 14)
Washer
(STEPS 2, 14)
Back
Upholstery		Locknut
		(STEPS 6,11)
		Spreader Bar
		(STEPS 6,17)
Locknut		Mounting Screw
(STEPS 6,11)		Torque to 60 in/lbs
		(STEPS 6,11)
Mounting		Mounting Screws
Screw
(STEPS 6,11)		(STEPS 3, 13)
Insert		Washers
		(STEPS 3, 13)
(STEPS 4,8)
Mounting Screws
Torque to 75 in/lbs
(STEPS 3, 13)
Washers	Seat Frame
(STEPS 3, 13)
	FIGURE 2 - CHANGING BACK HEIGHT
	39