PROCEDURE 15 | MWD WHEELCHAIRS |
|
|
M
W D
W H E E L C H A I R S
14.Reinstall the front battery box. Refer to INSTALLING/ REMOVING GROUP 24 BATTERY BOXES or IN-
STALLING/REMOVINGGROUP22BATTERYBOX in PROCEDURE 9 of this manual.
Shock Eyelet | Spring | |
Assembly | ||
Retainer | ||
|
Shock
Spring
Spring
Base
Shock
FIGURE 7 - SHOCK SPRING REPLACEMENT
REPLACING STABILIZER FORK ASSEMBLY (FIGURE 8)
1.Remove the mounting screw and locknut that secures thetopofthestabilizerforkassemblytothebaseframe.
2.Remove the mounting screw, two (2) washers, two
(2)spring washers, two (2) outer link spacers, two
(2)flat washers, and locknut that secure the stabi- lizer fork assembly, stabilizer bracket, and stabi- lizer wheel together.
3.Secure NEW stabilizer fork assembly to stabilizer bracket and stabilizer wheel with existing mount- ing screw, two (2) washers, two (2) spring wash- ers, two (2) outer link spacers, two (2) flat wash- ers, and locknut. Securely tighten.
4.Secure top of stabilizer fork assembly to base frame with existing mounting screw and locknut. Torque to 40 in/lbs.
REPLACING STABILIZER WHEELS (FIGURE 8)
1.Remove the mounting screw, two (2) washers, two
(2)spring washers, two (2) outer link spacers, two
(2)flat washers, and locknut that secure the stabi- lizer wheel, stabilizer bracket, and stabilizer fork assembly together.
2.Secure NEW stabilizer wheel to stabilizer bracket and stabilizer fork assembly with existing mount- ing screw, two (2) washers, two (2) spring wash- ers, two (2) outer link spacers, two (2) flat wash- ers, and locknut. Securely tighten.
Base Frame
Mounting Screw
Locknut
Stabilizer
Bracket
Flat
Washer
Locknut
Spring Washer | Outer Link Spacers |
Washer
NOTE: Remove this mounting screw and locknut only when replacing the stabilizer fork assembly.
Mounting Screw
Stabilizer
Fork
Assembly*
Washer
Stabilizer Wheel
*NOTE: The spring shown on the stabilizer fork assembly is for wheelchair models built before 7/1/1999
FIGURE 8 - REPLACING STABILIZER FORK ASSEMBLY/REPLACING STABILIZER WHEELS
74
