JVC HR-XVC33UM ON-SCREEN DISPLAY (VCR deck)

Masterpage:Right-No-Heading
EN 11
Filename [XVC33UM_06Index.fm]
Page 11 4 August 2003 6:42 pm
ON-SCREEN DISPLAY (VCR deck)
If you press DISPLAY on the Remote when “SUPERIMPOSE” is set to “ON” (墌pg.76), various operational indicators
appear on the TV screen.
For On-screen display for DVD deck, refer to “Using the on-screen bar” (墌pg. 48).
AOperation Mode Indicators
BTape Speed (SP/EP)
CTape Position Indicator
The tape position indicator
appears on the TV screen
when you press REW (3)
or FF (5) from the Stop
mode or perform an Index
Search. (墌pg.30) The
position of “q” in relation to
“0” (beginning) or “+” (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
DIndex number 墌pg. 30
ETape Remaining Time Indicator 墌pg. 35
FCounter Display
GAudio Mode Display 墌pg. 32
HSAP Indicator 墌pg. 35
IStereo Program Indicator 墌pg. 35
JDay/Clock Display
KChannel Position Number/Auxiliary Input
Indicator (F-1 or L-1)
L“Cassette Loaded” Mark
Beginning End
To recall an indication
APress DISPLAY.
●All indications corresponding to the current status are
displayed for 5 seconds. After that, the counter
information and RECORD/PAUSE if in the Record Pause
mode, remain on the screen.
BPress DISPLAY again to clear the display.
●The RECORD/PAUSE indication remains on the screen.
XVC33UM_01.book Page 11 Monday, August 4, 2003 7:24 PM