JVC HR-XVC33UM manual Edit From a Camcorder, 68 EN

Filename [XVC33UM_09Editing.fm]
XVC33UM_01.book Page 68 Monday, August 4, 2003 7:24 PM	Masterpage:Left0

68 EN EDITING (VCR DECK)

Edit From A

Camcorder

Recorder

AUDIO input	To PAUSE
	connector
VIDEO
input

Audio/video cable

(not supplied)

Mini-plug cable (not provided)

To Audio/VIDEO (JVC camcorder

Outputonly) connectors

Camcorder

To EDIT

Player

You can use a camcorder as the source player and your unit as the recording deck.

Slide the TV/VCR/DVD switch to the right.

A Make connections.

Connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the unit’s front panel AUDIO and VIDEO input connectors.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your unit.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the unit. Refer to the camcorder’s instruction manual for operating procedure.

●You can also use the AUDIO/VIDEO INPUT connectors on the rear panel.

B Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

C Set the unit’s input mode.

Press AUX (number key “0”) and/or CH to select “F-1” for the front AUDIO/VIDEO input connectors, “L-1” for the rear AUDIO/VIDEO INPUT connectors, depending on the connectors being used.

D Set the edit mode.

See “PICTURE CONTROL” on page 76.

E Engage the Record Pause mode.

Use PLAY (4), REW (3), or FF (5) to locate the point where you start recording, then press and hold PAUSE (9) and press REC (7) to engage the Record Pause mode.

F Start the camcorder.

Engage the Play mode of the camcorder.

G Start the unit.

Press PLAY (4) to engage the Record mode of the unit.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select “EDIT” to dub tapes in step D, be sure to select “NORM” after you finish dubbing the tapes.

Page 68

4 August 2003 6:50 pm