JVC HR-XVC33UM manual 36 EN, Access the Program screen, Enter the program start time

Filename [XVC33UM_07S-VHS.fm]

XVC33UM_01.book Page 36 Monday, August 4, 2003 7:24 PMMasterpage:Left+

36 EN OPERATIONS ON VCR DECK (cont.)

Express Timer Programing

Before performing Express Timer Programing:

●Make sure that the unit’s built-in clock is set properly.

●Insert a cassette with the safety tab in place. The unit will come on automatically.

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Example: To timer-record the program from 8:00 to 10:00 on 24th December, on channel 12.

A Select the VCR deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the Remote

Press VCR so that the VCR indicator lights up.

B Access the Program screen.

Press PROG.. (If you’re just starting out, “P1” appears.)

C Enter the program start time.

Press START +/– to enter the time you want recording to start.

● Press and hold START +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

D Enter the program stop time.

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

E Enter the program date.

Press DATE +/–.

●The current date appears on the TV screen. The date you enter appears in its place.

Page 36

4 August 2003 6:42 pm